News and Information

News and Information

NEWS

Technical Documentation

Inspection Requirements for the Sterilization Line of Braised and Boiled Egg Products

After installation, the sterilization line for braised and boiled egg products must undergo a full‑load thermal distribution test. The test is required to verify that the sterilizer’s heat distribution is uniform, thereby meeting the sterilization temperature specifications outlined in the process procedure. The acceptance criterion is whether the temperature differences at various locations within the sterilizer at any given time remain within the specified tolerance range.

09

2021

/

04

From the perspective of control mode, what types of pasteurization equipment for sea duck eggs are there?

During the sterilization process of sea duck egg‑processing equipment, it is essential to perform initial venting and then release steam to ensure proper steam circulation. Alternatively, venting can be carried out every 15–20 minutes to enhance heat exchange. In summary, the sterilization conditions of the equipment must be strictly adhered to, following prescribed procedures for sterilization temperature, pressure, and time; the product’s sterilization protocol specifies both the duration and the operational methods.

09

2021

/

04

The Development of Sterilization Autoclave Manufacturers

The sterilization kettle consists of a vessel body, a lid, an opening mechanism, locking wedges, a safety interlock device, guide rails, a sterilization basket, steam nozzles, and multiple spray nozzles. Using pressurized steam as the heat source, it features a large heating surface, high thermal efficiency, uniform heating, short boiling times for liquid products, and easy temperature control. As one of the key pieces of disinfection equipment, the sterilization kettle plays a vital role in the food industry. It is primarily used to sterilize foods, canned goods, and protein‑based beverages that require high‑temperature pasteurization.

28

2021

/

04

The operating procedure of a food sterilization pot

During the initial heating of hot water, cold water is supplied by a pump. Subsequently, when the water level in the sterilizer’s storage tank reaches a specified setpoint, the liquid-level controller automatically opens the tank‑heating valve Vi, allowing 0.5 MPa steam to enter the tank directly. The water is heated to the target temperature, after which heating is stopped. Once the tank temperature drops below the setpoint, steam is automatically reintroduced to maintain the desired temperature.

20

2021

/

05

The operating principle of the breakfast porridge sterilization line

The breakfast porridge sterilization line consists of a pot body, a pot lid, an opening mechanism, a locking wedge, a safety interlock device, a track, a sterilization basket, steam nozzles, and multiple spray nozzles. The pot lid is sealed with an inflatable silicone rubber temperature‑resistant sealing ring, ensuring reliable sealing and a long service life. It features a large heating surface, high thermal efficiency, uniform heating, short boiling times for liquid materials, and easy control of the heating temperature.

01

2021

/

06

What should be noted when using a sterilization autoclave?

The sterilization kettle operates on the principle of high‑temperature, high‑pressure hot water to rapidly sterilize a wide range of food products. As the food moves through the unit in a continuous, slow rotation, heat is conducted more quickly and evenly, shortening the sterilization time and achieving a high‑temperature, short‑time sterilization effect that ensures consistent product quality. This equipment is widely used in the food, beverage, and canned‑food industries. The sterilization kettle is a type of sterilizing boiler equipped with a louver‑style pressure vessel safety interlock, an independent electrical instrumentation control system, and automatic functions for maintaining constant temperature, heat preservation, and timed operation. Constructed from stainless steel, it offers an attractive appearance, hygienic performance, enhanced safety, and long‑lasting durability.

08

2021

/

06

< 1...19 20 21...27 >

Hongde Heavy Industry

Mobile QR code

Zhucheng Jintai Food Machinery Co., Ltd.

Address: Haojia Industrial Park, Zhucheng City, Shandong Province
Customer Service Hotline:0536-6176789

Mobile phone:13780817266/18866755858
Fax: 0536-6083126
Email:jtspjx@163.com

Image Name

Copyright © 2022 Zhucheng Jintai Food Machinery Co., Ltd.

Website Development: China Enterprise Dynamics Weifang|SEO tags